Opening A Case With Jtac; Revision History - Juniper MX240 Quick Start Manual

Opening a Case with JTAC

Revision History

Copyright © 2015, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
Copyright © 2015, Juniper Networks, Inc.
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool:
https://tools.juniper.net/SerialNumberEntitlementSearch/
You can open a case with JTAC on the Web or by telephone.
Use the Case Management tool in the CSC at
Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, visit us at
http://www.juniper.net/support/requesting-support.html
January 2015—530-040793. Revision 1. Minor updates.
April 2011—Added high-capacity power information.
August 2010—530-036126. Revision 1. Revised initial configuration procedure.
December 2009—530-031141. Revision 1. Updated procedure for connecting DC power.
Updated information about FPCs and PICs. Updated lifting procedures.
February 2008—530-022141. Revision 1. Initial release.
Requesting Technical Support
http://www.juniper.net/cm/
.
31