Juniper MX240 Quick Start Manual page 16

MX240 3D Universal Edge Router Quick Start
16
CAUTION: Avoid bending fiber-optic cable beyond its minimum bend
radius. An arc smaller than a few inches in diameter can damage the cable
and cause problems that are difficult to diagnose.
CAUTION: Do not let fiber-optic cable hang free from the connector. Do
not allow fastened loops of cable to dangle, which stresses the cable at
the fastening point.
Figure 9: Connect DPC Cables
Proceed to "Step 6: Connect Power Cables" on page 17.
Copyright © 2015, Juniper Networks, Inc.