Before Operating The Telephones - Panasonic KX-NS1000 User Manual

1.1.5 Before Operating the Telephones

What Kind of Telephone Can Be Used?
You can use the following types of telephone with this PBX:
•
Panasonic IP Proprietary Telephone (IP-PT)
(e.g., KX-NT300 series, KX-NT500 series)
•
Panasonic Digital Proprietary Telephone (DPT)
(e.g., KX-T7600 series, KX-DT300 series)
•
Panasonic Analogue Proprietary Telephone (APT)
(e.g., KX-T7700 series)
•
Panasonic Portable Station (PS)
(e.g., KX-TCA364, KX-WT125)
•
SIP-CS compatible Portable Station (S-PS)
(e.g., KX-UDT series)
•
SIP phone
(e.g., KX-UT series SIP phones, Third party SIP phones)
•
Single Line Telephone (SLT)
(e.g., rotary pulse telephone)
Which features are available depend on the type of telephone being used. If you are using a Panasonic
telephone with a special feature button such as
the buttons or displayed messages for easy programming. If you use a large display telephone (e.g.,
KX-NT346 or KX-T7636), you can follow the displayed messages to use the features. If your telephone does
not have feature buttons and/or a display, you may operate the PBX by entering a feature number instead.
Follow the operation for your type of telephone.
Registration for your Portable Station (PS)/SIP Phone/SIP-CS compatible Portable Station
(S-PS)
Your PS, SIP phone, or S-PS must be registered with the PBX and assigned an extension number before initial
use, through system programming. To confirm the extension number of your PS, refer to "Your extension
information" in "3.1.2 Settings on the Programming Mode". For SIP phone and S-PS users, follow the
instructions for your phone.
Feature Numbers
To use certain features, you need to enter specified feature numbers (and an additional parameter, if required).
There are two types of feature numbers as follows:
•
Flexible feature number
•
Fixed feature number
Fixed feature numbers cannot be changed. However, you can change the flexible numbers to other numbers
for easier use. In this manual, the default numbers (factory installed) are used for operations.
1.1.5 Before Operating the Telephones
or a display or both, you can follow the operations using
•
If you use a Panasonic proprietary
telephone which does not have feature
buttons, you may change one of the
unused flexible buttons to a feature
button. Refer to "3.1.3 Customising the
Buttons".
User Manual 23