Panasonic KX-NS1000 User Manual page 139

To change your password
PT/SLT/PS/SIP Extn./S-PS
Log in to your mailbox.
2
Enter 2 to accept.
CAUTION
•
It is strongly recommended that a password of 16 numbers be used for maximum
protection against unauthorised access.
•
To avoid unauthorised access to the PBX, keep the password secret. If it becomes known
to others, the PBX may be misused.
•
Change the password periodically.
Changing or Deleting Your Subscriber (Owner) Name
You can record your name in the Unified Messaging system. The system can then announce your name for
callers to let them know that they have reached the correct mailbox. If a caller does not know your mailbox
number, the caller can try to reach you by entering the first few letters of your first or last name (Dialling by
Name feature). After entering the first few letters of your name, the Unified Messaging system will announce
the names of Unified Messaging system subscribers whose names share those letters, and the caller can
select your name.
To change/delete your subscriber name
PT/SLT/PS/SIP Extn./S-PS
Log in to your mailbox.
Enter 433 to delete your subscriber name,
then go on-hook to finish.
2
Enter 2 to accept.
Common Service Commands and Navigation Commands
Commands for Changing the Current Unified Messaging System Service
After going off-hook and pressing the MESSAGE button
group's floating extension number, you can enter a service command to access certain Unified Messaging
4 2 1
Enter 421.
On-hook.
4 3 1
C.Tone
Enter 431.
On-hook.
1.8.2 Logging in to and Configuring Your Mailbox
your desired password
Enter the desired password and #.
Enter 1 to end recording.
State your name.
, Voice Mail Transfer button, or enter the UM
*1
#
1
User Manual 139