Olympus SP-510UZ Advanced Manual page 71

Monitor indication
This card cannot be used in
C A RD S ETUP [ x D ]
this camera. Or, the card is
not formatted.
POWER OFF
FORMAT
SET
OK
There is an error in the
ME MORY SE TUP [ I N ]
internal memory.
POWER OFF
MEMORY FORMAT
SET
OK
The camera is not connected
to the printer correctly.
NO CONNECTION
There is no paper in the
printer.
NO PAPER
The printer has run out of ink. Replace the ink cartridge in the printer.
NO INK
The paper is jammed.
JAMMED
The printer's paper tray has
been removed or the printer
SETTINGS
has been operated while
CHANGED
changing settings on the
camera.
There is a problem with the
printer and/or camera.
PRINT ERROR
r
Pictures recorded on other
cameras may not be printed
CANNOT PRINT
on this camera.
Possible cause Corrective action
Format or replace the card.
• Select [POWER OFF] and press o.
Insert a new card.
[YES] and press o.
• Select [FORMAT]
All data on the card is erased.
Select [MEMORY FORMAT]
press o. All data in the internal memory is
erased.
Disconnect the camera and connect it again
correctly.
Load some paper in the printer.
Remove the jammed paper.
Do not operate the printer while changing
settings on the camera.
Turn off the camera and printer. Check the
printer and remedy any problems before
turning the power on again.
Use a computer to print.
[YES] and
71
EN