Olympus SP-510UZ Advanced Manual page 43

TIME
SNOOZE
ALARM SOUND
Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off the camera. Note that
pressing o will turn the camera on.
After 1 minute of no operation, the alarm stops automatically and the camera turns off when
[SNOOZE] is set to [OFF].
• Checking the alarm settings:
While the camera is off, press DISP./E to display the set alarm time and the current time for 3
seconds.
VIDEO OUT
................................................................................. Playing back pictures on a TV
NTSC / PAL
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV's video signal type.
• TV video signal types by country/region Check the video signal type before connecting the camera to
the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Connector cover
Settings on the TV
Turn the TV on, and set it to video input mode.
• For details of switching to video input, refer to
your TV's instruction manual.
Sets the alarm time.
OFF No snooze is set.
ON Alarm is activated every 5 minutes, up to 7 times.
1 LOW / MID / HIGH
2 LOW / MID / HIGH
3 LOW / MID / HIGH
AV cable (provided)
Connect to the TV's video input
(yellow) and audio input (white)
terminals.
Multi-connector
Settings on the camera
Press o in playback mode to turn the
camera on.
• The last picture taken is displayed on the TV.
Use the arrow pad to select the picture you
want to display.
43
EN