Olympus SP-510UZ Advanced Manual page 27

PANORAMA
...............................................................................Creating a panoramic picture
Allows you to create a panoramic picture, using the OLYMPUS Master software from the provided
CD-ROM. An Olympus xD-Picture Card is required for panorama shooting.
Connects pictures from
left to right
q: The next picture is connected at the
right edge.
p: The next picture is connected at the
left edge.
Use the arrow pad to specify at which edge you want to connect the pictures, and then compose
your shots so that the edges of the pictures overlap. The part of the previous picture where it will
be joined to the next picture does not remain in the frame. You have to remember what the part in
the frame looked like and take the next picture so it overlaps.
Panorama shooting is possible for up to 10 pictures. Press o to exit panorama shooting.
>
..................................................................... Adjusting the white balance compensation
>
[ I N ]
BACK MENU SET
SHARPNESS
............................................................... Adjusting the sharpness of the image
CAMERA MENU CAMERA MENU
1
PANORAMA
>
2
3
SHARPNESS
0
4
CONTRAST
5 SATURATION
BACK OK
MENU SET
The white balance can be adjusted in 7 increments in both the
[RED] and [BLUE] directions.
BLUE BLUE
s:Each press makes the color more blue.
r: Each press makes the color more red.
RED RED
When the white balance is adjusted, press o.
OK
s (Toward +): The image contours are emphasized, making
the image appear sharper and more vivid. Use this
setting when you want to print pictures. If you adjust
the sharpness too far toward +, noise may become
conspicuous in the picture.
r (Toward –): The image contours are softened. Use this
setting when you want to edit images on a computer.
Connects pictures from
bottom to top
s: The next picture is connected at the
top.
r: The next picture is connected at the
bottom.
27
EN