Using Forwarding (Hipath 4000); Call Forwarding Via Code Numbers - Siemens HiPath 4000 Operating Instructions Manual

Forwarding calls
Step by Step
Call forwarding
n
or and
or
36
Deactivating call forwarding
Press the key. The lamp goes out.
If your telephone does not have a "call forwarding" key:
ree
Lift the handset and enter the UK code
rhh
or Standard code
t
Replace the handset.

Using forwarding (HiPath 4000)

You can program two forwarding modes:
• "Fixed forwarding" and
• "Variable forwarding"
With fixed forwarding, you program a forwarding desti-
nation that remains valid until you modify or clear it.
You can activate/de-activate this forwarding mode.
With variable forwarding, you can select one of six dif-
ferent forwarding types.
When you program a forwarding destination, you activa-
te forwarding. If forwarding is de-activated, the forwar-
ding destination is automatically cleared.

Call forwarding via code numbers

The following call-forwarding modes can be set up via
codes:
Call-forwarding mode
Programming and activating fixed call-for-
warding
Activating fixed call-forwarding
Clearing (and de-activating) fixed call-for-
warding
De-activating fixed call-forwarding
Programming and activating unconditional,
variable call-forwarding
Programming and activating variable call-
forwarding for internal calls
Programming and activating variable call-
forwarding for external calls
Code
(example)
*51
*41
#51
#41
*42
*44
*43