Appendix
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service center.
While the projector is locked with the PIN code.
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
Be sure to stick the adhesive cable holder (supplied) on
the bottom of the projector and store the USB cable in the
holder to prevent the cable from blocking communication
between the infrared remote receiver and remote control
(see the illustration).
76
Downloaded From projector-manual.com Sanyo Manuals
PIN Code Number Memo
PIN Code Lock No .
Logo PIN Code Lock No .
Attatching the Cable Holder
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
Cable Holder (supplied)
Interactive Camera
Remote Control Operating Range
USB Cable (supplied)
Infrared Remote Receiver