Pin Code Number Memo; Lamp Replacement Label - Sanyo PLC-XU88W Owner's Manual

Appendix

PIN Code Number Memo

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service station.
PIN Code Lock No .
Logo PIN Code Lock No .
While the projector is locked with the PIN code.
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.

Lamp Replacement Label

When using the projector ceiling-mounted, put the Lamp
replacement label (supplied) on in a prominent place of
the projector's body to check the Replacement Lamp Type
Number.
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
Lamp Replacement Label
75