Olympus FE-4000, X-925, X-920 Instruction Manual page 32

Selecting a video signal system to match your TV [ VIDEO OUT]
E
SETUP
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV's video signal type.
Submenu 2
NTSC
PAL
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)."
For details on changing the input source of the TV, refer to the TV's instruction manual.
4 Press the q button, and use klmn to select the image for playback.
Depending on the TV's settings, the displayed images and information may become cropped.
32 EN
VIDEO OUT
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
Connecting the camera to a TV in European countries, China, and so on.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
Application
Multi-connector
AV cable (supplied)