Setting The Date And Time; Changing The Display Language - Olympus FE-4000, X-925, X-920 Instruction Manual

Setting the date and time

The date and time set here are saved to image
fi le names, date prints, and other data.
1
Press the n button to turn on
the camera.
●
The date and time setting screen is displayed
when the date and time are not set.
X
Y
----
CANCEL
Date and time setting screen
2
Use kl to select the year for
[Y].
X
Y
2009
CANCEL
3
Press n to save the setting for [Y].
X
Y
2009
CANCEL
4
As in Steps 2 and 3, use klmn
and the B button to set [M] (month),
[D] (day), [TIME] (hours and
minutes), and [Y/M/D] (date order).
For a more accurate setting, press the
B button when the time signal hits
00 seconds.
To change the date and time, adjust the
setting from the menu. [X] (Date/time)
(p. 31)
M D TIME
-- -- -- --
Y M D
MENU
M D TIME
Y M D
-- -- -- --
MENU
M D TIME
Y M D
-- -- -- --
MENU

Changing the display language

The language for the menu and error messages
displayed on the monitor is adjustable.
1
Press the m button, and press
klmn to select [E] (SETUP).
EXIT
2
Press the B button.
SETUP
1 MEMORY FORMAT
2 BACKUP
3
PIXEL MAPPING
EXIT
3
Use kl to select [W] and
press the B button.
4
Use klmn to select your
language and press the B button.
5
Press the m button.
SETUP
SET OK
MENU
ENGLISH
NO
SET OK
MENU
EN 13