Olympus FE-330 Instruction Manual page 28

PIXEL MAPPING
The pixel mapping feature allows the camera to check and adjust the CCD and image
processing functions. It is not necessary to operate this function frequently. Approximately
once a year is recommended. Wait at least one minute after taking or viewing pictures to
allow the pixel mapping function to perform properly. If you turn the camera off during pixel
mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press .
K/q
......................................................... Turning on the camera with the
YES
NO
MENU COLOR
NORMAL
• Select [MY FAVORITE] and press Y to set a still picture registered in "My Favorite" as the
background.
g "SET Registering favorite pictures" (P. 24)
SOUND SETTINGS
You can set the following with [SOUND SETTINGS].
• Setting the volume of the button operation sound. (BEEP)
• Selecting the volume of the shutter button. (SHUTTER SOUND)
• Adjusting the volume of the camera warning sound. (8)
• Adjusting the volume during playback. (q VOLUME)
BEEP
SHUTTER SOUND
8
q VOLUME
• You can set all the sounds muted at once by setting [SILENT MODE].
g "SILENT MODE Muting operational sounds" (P. 23)
s
.......................................................................................... Adjusting the monitor brightness
BRIGHT/ NORMAL
28
EN
.................................................. Adjusting the image processing function
Pressing K turns on the camera and starts the camera in the shooting mode.
Pressing q turns on the camera and starts the camera in the playback mode.
The power is not turned on. To turn on the camera, press o.
......................................... Setting the menu screen color and background
/ COLOR1 / COLOR2 / COLOR3 / MY FAVORITE
......................................... Setting the sound output from the camera
OFF (No sound) /
OFF (No sound) /
OFF (No sound) /
OFF (No sound) /
LOW / HIGH
LOW / HIGH
LOW / HIGH
1 / 2 / 3 / 4 / 5
q
K
or button