Error Message - Olympus FE-26 Instruction Manual

Error message

When one of the messages below is
displayed on the monitor, check the
corrective action.
Error message Corrective action
q
Card problem
Insert a new card.
CARD ERROR
q
Card problem
Use a computer to cancel the
WRITE
read-only setting.
PROTECT
Internal memory problem
>
• Insert a card.
MEMORY FULL
• Erase unwanted images.
Card problem
q
• Replace the card.
CARD FULL
• Erase unwanted images.
Card problem
• Use kl to select
[CLEAN CARD], and press the
B button. Take out the card,
CARD SETUP
wipe the contact area (p. 45)
with a soft, dry cloth, and then
CLEAN CARD
load the card again.
FORMAT
• Use kl to select
SET OK
[FORMAT], and press the
B button. Next, use kl
to select [YES], and press the
B button.
Internal memory problem
MEMORY SETUP
IN
Use kl to select
[MEMORY FORMAT], and press
POWER OFF
the B button. Next, use kl
MEMORY FORMAT
to select [YES], and press the
SET OK
B button.
Internal memory/Card problem
L
Take pictures before viewing
NO PICTURE
them.
Problem with selected image
Use photo retouch software,
r
etc. to view the image on a
PICTURE
computer. If the image still
ERROR
cannot be viewed, the image fi le
is corrupted.
r
Problem with selected image
THE IMAGE
Use photo retouch software, etc.
CANNOT
to edit the image on a computer.
BE EDITED
*1
*1
*2
*2
Operation problem
Close the battery/card
compartment cover.
CARD-COVER
OPEN
Battery problem
g
• Insert new batteries.
BATTERY
• If using rechargeable batteries,
EMPTY
charge the batteries.
Connection problem
Connect the camera and
NO
computer or printer correctly.
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
Printer problem
Refi ll the ink in the printer.
NO INK
Printer problem
Remove the jammed paper.
JAMMED
Printer problem
SETTINGS
Return to the status where the
CHANGED
*3
printer can be used.
Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
PRINT ERROR
power on again.
r
Problem with selected image
CANNOT PRINT Use a computer to print.
*4
Before erasing important images, download them to
*1
a computer.
*2 All data will be erased.
This is displayed, for instance, when the printer's
*3
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
This camera may be unable to print images taken by
*4
other cameras.
EN 41