Error Message - Olympus XZ-2 Instruction Manual

Miscellaneous
The camera makes a noise when taking pictures.
• The camera may activate the lens and make a noise even if no operation is performed.
This is because the camera automatically performs actions of auto focus as far as it is
ready to shoot.

Error message

Monitor
indication
Card Error
Write Protect
6
Memory Full
Card Full
Card Setup
Power Off
Format
Memory Setup
Power Off
Memory Format
No Picture
* All data will be erased.
78 EN
Possible cause
There is a problem with the card.
Writing to the card is prohibited.
• The internal memory is full.
No more pictures can be taken
or no more information such
as print reservation can be
recorded.
• There is no space in the
internal memory and print
reservation or new images
cannot be recorded.
• The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
• There is no space in the card
and print reservation or new
images cannot be recorded.
Card cannot be read. Card may
not have been formatted.
Set
There is a problem with the
internal memory.
Set
There are no pictures on the
card.
Corrective action
Insert the card again.
If the problem persists, format
the card.
If the card cannot be formatted, it
cannot be used.
The card write-protect switch is
set to the "LOCK" side. Release
the switch. (P. 84)
Insert the card or erase unwanted
pictures.
Before erasing, download
important images to a PC.
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
Use FG to select [Format], and
press the A button. Next, use
FG to select [Yes], and press
the A button.*
Use FG to select [Memory
Format], and press the A button.
Next, use FG to select [Yes],
and press the A button.*
The card contains no pictures.
Record pictures and play back.