Installing The Battery In The Remote Control - Samsung HW-K450 User Manual

DESCRIPTIONS
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
Press the p button to pause a file temporarily.
Press the p button again to play the selected file.
If there is more than one file on the device you are playing, and you press
the [ button, the previous file is selected.
Press to select TREBLE, BASS, SUB WOOFER LEVEL, AUDIO SYNC,
SPEAKER, or REAR LEVEL
Then, use the ,  buttons to adjust the Treble or Bass volume from -6 ~ +6,
SuB WOOFer LeVeL volume from -12, -6 ~ +6.
Press and hold the SOUnD COnTROL button for about 5 seconds to adjust
the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,
5KHz and 10KHz are selectable and each can be adjusted to a setting between
• To adjust the woofer level using the Samsung Audio remote mobile app,
press the [, ] buttons to decrease or increase the woofer level within 3
seconds of pressing the WOOFER button.
If the Soundbar is connected to a digital TV and the video appears out of sync
with the audio, press the SOUnD COnTROL button to select AuDIO SYNC to
sync the audio with the video. use the ,  buttons to set the audio delay
between 0 ms and 300 ms. In uSB mode, TV mode, and BT mode, the Audio
Sync function is not available.
To control the volume of the rear speaker sound, select REAR SPEAKER in
Sound Control, and then adjust the volume between OFF-rS and ON-rS by
To control the volume of the rear level sound, select REAR LEVEL in Sound
Control, and then adjust the volume between rS -6~+6 by using the , 
• The REAR SPEAKER and the REAR LEVEL mode are only available when
you connect the SWA-8000S (sold separately).
Power
Volume
Play / Pause
Skip Back
SOUnD COnTROL
REAR
.
-6 and +6.
using the ,  buttons.
buttons.
10
+ Controlling the Soundbar using your TV Remote Control
1. Press and hold the SOUND button for more than 5 seconds while the Soundbar is turned on.
2. "ON - TV reMOTe" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
● TV menus differ by manufacturer and model. refer to the TV's user manual for further information.
● Only the VOLuMe +/- and the MuTe buttons will be available to control the Soundbar.
● This function is not available when the Soundbar is in the TV SoundConnect, TV ArC, or HDMI mode.
● Manufacturers supporting this function:
- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GruNDIG, Hisense, rCA
- This function may not be compatible with your TV's remote depending on the remote control's
manufacturer.
SOUND button for 5 seconds, ON-TV reMOTe and OFF-TV
● each time you press and hold the
reMOTe alternate.

InSTALLIng THE BATTERy In THE REMOTE COnTROL

1. use a suitable coin to turn the 2. Insert a 3V lithium battery. Keep the
remote control's battery cover positive (+) pole facing up when inserting
counterclockwise to remove it the battery. Put the battery cover on and
as shown in the figure above. align the '●' marks side by side as
shown in the figure above.
INSTALLATION
3. use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix it
in place.
11