Bottom Panel; Remote Control - Samsung HW-K450 User Manual

DESCRIPTIONS

BOTTOM PANeL

DIgITAL AUDIO In
(OPTICAL)
Connect to the digital (optical)
output of an external device.
(Micro USB Port)
Connect a Micro uSB to
Standard uSB adapter (not
supplied) to the Micro uSB port,
DIGITAL AUDIO IN
and then connect a uSB device
(OPTICAL)
to the adapter to play music
from the uSB device. refer to
USB (5V 0.5A)
the uSB Cable specification on
page 24.
AUX In
AUX IN
Connect to the Analog output of
an external device.
LABEL
HDMI In
Inputs digital video and audio signals simultaneously using
an HDMI cable. use when connecting a supported external
HDMI OUT (TV-ARC)
Outputs digital video and audio signals simultaneously
using an HDMI cable.
● When disconnecting the power cable of the AC/DC power adaptor from a wall outlet, pull the plug.
Do not pull the cable.
● Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
● Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it
is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
DC 24V
(Power Supply In)
Connect the AC/DC power
adaptor to the power supply
jack, and then connect the
AC/DC power adaptor plug
to a wall outlet.
DC 24V
DIGITAL AUDIO IN HDMI IN
(OPTICAL)
DC 24V
USB (5V 0.5A)
HDMI OUT
(TV-ARC)
AUX IN
HDMI IN
device.
HDMI OUT
(TV-ARC)
8

reMOTe CONTrOL

SOURCE
Press to select a source connected to the Soundbar.
Mute
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
Repeat
Press to set the repeat function during music playback from a uSB device.
OFF - REPEAT : Cancels repeat Playback.
TRACK - REPEAT : Plays a track repeatedly.
ALL - REPEAT : Plays all tracks repeatedly.
RAnDOM - REPEAT : Plays tracks in random order repeatedly.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you press
the ] button, the next file is selected.
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the Bluetooth
POWer On function on and off. See pages 22 and 28 for details.
SOUnD
Surr.Sound adds depth and spaciousness to the sound. Pressing the
SOUnD button repeatedly cycles through the Surr.Sound settings :
On - SURROUnD SOUnD, OFF - SURROUnD SOUnD
Press and hold the  button for about 5 seconds to turn the Anynet+ function
on or off.
OFF - AnynET+, On - AnynET+
The Anynet+ function lets you control the Soundbar with the remote from an
Anynet+ compatible Samsung TV.
The Soundbar must be connected to the TV via an HDMI cable.
Press and hold the  button for about 5 seconds to turn the Auto Power Link
function on or off.
OFF - POWER LInK, On - POWER LInK
* Auto Power Link
Synchronizes the Soundbar to a connected Optical source via the Optical jack
so it turns on automatically when you turn on your TV. (See page 20)
• This function is only available in the D.IN mode.
SOUnD EFFECT
You can select from 6 different sound modes - STAnDARD (Original Sound),
MUSIC, CLEAR VOICE, SPORTS, MOVIE, and nIgHT MODE - depending
on the content you want to listen to.
Select the STAnDARD mode if you want to enjoy the original sound.
● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.
DESCRIPTIONS
9