Hdmi Cable; Usb - Samsung HW-K450 User Manual

CONNECTIONS

HDMI CABLE

HDMI is the standard digital interface for connecting to TVs, projectors, DVD players, Blu-ray players, set top boxes,
and more. HDMI prevents any degradation to the signal due to conversion to analog and maintains the video and
audio quality of the original digital source.
HDMI Cable
Digital Devices
HDMI OUT
(not supplied)
1. Connect an HDMI cable (not supplied) from the HDMI In jack on the bottom of the product to the HDMI OuT jack
on your digital device.
2. Press the button on the right side of the Soundbar or the SOURCE button on the remote control to select
the HDMI mode.

USB

You can play music files located on uSB storage devices through the Soundbar.
USB port
DIGITAL AUDIO IN HDMI IN
(OPTICAL)
DC 24V
USB (5V 0.5A)
HDMI OUT (TV-ARC)
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
USB Cable
(not supplied)
AUX IN
1. Connect a uSB adapter cable with a male uSB 2.0 Micro uSB plug (Type B) on one end and a standard female
2.0 uSB jack (Type A) on the other end to the micro uSB jack on your Soundbar.
● The uSB adapter cable is sold separately. To purchase, contact a Samsung Service Center or Samsung
Customer Care.
2. Connect your uSB device to the female end of the adapter cable.
3. Press the button on the main unit's right side or the SOURCE button on the remote control to select the
USB mode.
HDMI IN
DIGITAL AUDIO IN
HDMI IN
(OPTICAL)
HDMI IN
DIGITAL AUDIO IN DC 24V
(OPTICAL)
USB (5V 0.5A) Wi-Fi SETUP SPK ADD HDMI OUT
(TV-ARC)
AUX IN
Display
24
4. USB appears on the display screen.
• The Soundbar connection to the uSB device is complete.
• The Soundbar automatically turns off (Auto Power Off) if no uSB device has been connected for more than
5 minutes.
+ Before you connect a USB device
Be aware of the following:
● If the file name of a file on a uSB device exceeds 10 characters, it is not displayed on the Soundbar's display.
● This product may not be compatible with certain types of uSB storage media.
● The Soundbar supports the FAT16 and FAT32 file systems.
The NTFS file system is not supported.
-
● Connect uSB devices to the uSB port of the product using a uSB 2.0 Micro uSB plug to standard female 2.0
uSB jack adapter cable. Otherwise, you may encounter a uSB compatibility problem.
● Do not connect multiple storage devices to the product via a multi-card reader. It may not operate properly.
● Digital camera PTP protocols are not supported.
● Do not remove the uSB device while it is transferring files.
● DrM-protected music files (MP3, WMA) from commercial web sites cannot be played.
● external HDDs are not supported.
● Mobile phone devices are not supported.
● File Format Type Compatibility list:
Extension Codec
MPeG 1 Layer2
MPeG 1 Layer3
*.mp3
MPeG 2 Layer3
MPeG 2.5 Layer3
Wave_Format_MSAudio1
*.wma
Wave_Format_MSAudio2
AAC
AAC-LC
*.aac
He-AAC
*.wav
-
*.ogg
OGG 1.1.0
*.flac
FLAC 1.1.0, FLAC 1.2.1
● If there are too many folders and files stored on the uSB device, it may take the Soundbar some time to
access and play files.
CONNECTIONS
Sampling Rate Bitrate
16KHz ~ 48KHz 80kbps~320kbps
16KHz ~ 48KHz 80kbps~320kbps
16KHz ~ 48KHz 80kbps~320kbps
16KHz ~ 48KHz 80kbps~320kbps
16KHz ~ 48KHz 56kbps~128kbps
16KHz ~ 48KHz 56kbps~128kbps
16KHz ~ 96KHz 48kbps~320kbps
128kbps~192kbps
16KHz ~ 96KHz
5.1ch 320kbps
48kbps~64kbps
24KHz ~ 96KHz
5.1ch 160kbps
16KHz ~ 48KHz up to 3000kbps
16KHz ~ 48KHz 50kbps~500kbps
16KHz ~ 96KHz up to 3000kbps
25