Connecting To A Tv Using A Digital Optical Cable; Connecting To A Tv Using An Hdmi (Digital) Cable; Tv Soundconnect - Samsung HW-K450 User Manual

CONNECTIONS
CONNeCTING TO A TV
● Important: Before you begin, put the battery into the remote. See page 11 for instructions.

COnnECTIng TO A TV USIng A DIgITAL OPTICAL CABLE

Optical Cable
OPTICAL OUT
1. Connect the DIgITAL AUDIO In (OPTICAL) jack on the Soundbar to the OPTICAL OuT jack of the TV with a
digital optical cable.
2. Press the (Source) button on the right side of the Soundbar or the SOURCE button on the remote control to
select the D.In mode.
+ Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, you can set Auto Power Link function to
ON and have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable.
2. Press the (Source) button on the main unit's right side or the SOURCE button on the remote control to select
the D.In mode.
3. Press and hold the  button on the remote control for about 5 seconds to toggle the Auto Power Link function
on and off.
● Depending on the connected device, Auto Power Link may not function.
● This function is only available in the D.IN mode.
DIGITAL AUDIO IN
(OPTICAL)
DIGITAL AUDIO IN
(OPTICAL)
DIGITAL AUDIO IN HDMI IN
(OPTICAL) DC 24V
USB (5V 0.5A) Wi-Fi SETUP SPK ADD (TV-ARC) HDMI OUT
AUX IN
20

COnnECTIng TO A TV USIng An HDMI (DIgITAL) CABLE

HDMI Cable
(not supplied)
HDMI IN
1. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the bottom of the product to the
HDMI IN jack on your TV.
2. Press the button on the right side of the Soundbar or the SOURCE button on the remote control to select
the D.In mode.
● HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
● If the TV provides an ArC port, connect the HDMI cable to the HDMI IN (ArC) port.
● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose
diameter is less than 14 mm.
● Anynet+ must be turned on.
● This function is not available if the HDMI cable does not support ArC.

TV SOUnDCOnnECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the
TV SoundConnect function.
Connect
1. Turn on the TV and Soundbar.
2. Press the button on the main unit's right side or the SOURCE button on the remote control to select the TV
mode.
3. On the TV, a message asking whether to enable the TV SoundConnect function appears.
4. Select <yes> using the TV's remote control to finish connecting the TV and Soundbar.
CONNECTIONS
HDMI OUT
(TV-ARC)
HDMI IN
HDMI OUT DIGITAL AUDIO IN
(TV-ARC) (OPTICAL)
HDMI IN
DIGITAL AUDIO IN DC 24V
(OPTICAL)
USB (5V 0.5A)
Wi-Fi SETUP SPK ADD HDMI OUT (TV-ARC)
AUX IN
21