Canon MD255 Instruction Manual page 80

Additional Information
COPYRIGHT PROTECTED DUBBING RESTRICTED
- You attempted to dub a copyright protected tape (
COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED
- You attempted to play back a copyright protected tape (
HEADS DIRTY, USE CLEANING CASSETTE
- Video heads are dirty. Clean the video heads (
INCORRECT TAPE SPECIFICATION PLAYBACK IS RESTRICTED
- You attempted to play back a tape recorded in a different television system (NTSC) or in a recording standard
not supported by this camcorder.
INPUT SIGNAL NOT SUPPORTED
- The digital device connected with the DV cable is incompatible with the camcorder.
NAMING ERROR
- The folder and file numbers have reached their maximum value. Set the [FILE NOS.] option to [RESET] and
erase all the images on the memory card (
NO CARD
- There is no memory card in the camcorder (
NO IMAGES
- No images are recorded on the memory card.
REMOVE THE CASSETTE
- Camcorder stopped operating to protect the tape. Remove the cassette and reinsert it (
SET THE TIME ZONE, DATE AND TIME
- You have not set the time zone, date and time. This message appears each time you turn the power on until
you set the time zone, date and time (
TAPE END
- Tape reached the end. Rewind the tape or replace the cassette.
THE CARD IS SET FOR ERASURE PREVENTION
- The write-protect switch on an SD or SDHC memory card is set to prevent accidental erasure. Change the
position of the write-protect switch.
THE TAPE IS SET FOR ERASURE PREVENTION
- Cassette is protected. Replace the cassette or change the position of the protect switch (
THIS IMAGE CANNOT BE RECORDED
- Some analog images cannot be recorded on the memory card depending on the signal.
TOO MANY STILL IMAGES DISCONNECT USB CABLE
- Disconnect the USB cable and decrease the number of still images on the memory card to less than 1,800. If
a dialog appeared on the computer screen, close it and then restore the connection.
TRANSFER ORDER ERROR
- You attempted to set more than 998 transfer orders (
Downloaded From VideoCamera-Manual.com Manuals
80
62).
62).
2).
51) or initialize it (
27).
23).
68).
53).
26).
84).