Locating The Beginning Of A Recording Date - Canon MD255 Instruction Manual

NOTES
If there are blank sections between
recordings, the zero set memory may not
work correctly.
Locating the Beginning of a Recording
Date
You can locate the change of the date/
time zone with the date search function.
Press or
controller.
• Press more than once to search for
further date changes (up to 10 times).
• To cancel the search press
NOTES
• The date search function will not detect
recordings shorter than 1 minute per
date/time zone.
• Date search may not function if the data
code is not displayed correctly.
Downloaded From VideoCamera-Manual.com Manuals
( 20)
on the wireless
STOP
.
Locating the End of the Last Scene
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
POINTS TO CHECK
Stop the playback before using this
function.
FUNC.
( 21)
FUNC.
[ END SEARCH]
• "END SEARCH" appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops
the tape.
• To cancel the end search push the
joystick ( ) toward
NOTES
• End search cannot be used once you
remove the cassette.
• If there are blank sections between
recordings, the end search may not
work correctly.
• You cannot use the end search to locate
the end of a scene that was audio
dubbed.
( 20)
[EXECUTE]
.
35