LG 50PK950 Training Manual page 22

Generic Plasma USB Automatic Software Download Instructions
Generic Plasma USB Automatic Software Download Instructions
1) Download the Software File.
2) Copy new software (xxx.bin) into the root of the
Jump Drive. Make sure you have the correct
software file.
3) With TV turned on, insert USB flash drive.
4) You can see the message
"TV Software Upgrade" (See figure on right)
5) Cursor left and highlight "START" Button and
push "Enter" button using the remote control.
6) You can see the download progress Bar.
7) Do not unplug until unit has automatically
restarted.
8) When download is completed, you will see
"COMPLETE".
9) Your TV will be restarted automatically.
Highlight Start Press Select
* CAUTION:
Do not remove AC power or the USB Flash Drive.
Do not turn off Power, during the upgrade
process.
Software Files are now available from
LGTechassist.com
22 October 2010
Currently Installed Version
Software Version found on
the USB Flash Drive
File found on the USB
Flash Drive
50PK950 Plasma