Getting Ready To Install The Refrigerator - Samsung rl55vqbrs User Manual

Hide thumbs Also See for rl55vqbrs:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
setting up your refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on your purchase of this Samsung
Refrigerator. We hope you enjoy state-of-the-art
features and effi ciencies that this new appliance offers.
• This refrigerator must be properly installed and
located in accordance with the manual before it
is used.
• Use this appliance only for its intended purpose
as described in this instruction manual.
• We strongly recommend that any servicing be
performed by a qualified individual.
• Please dispose of the packaging material for this
product in an environmentally friendly manner.
Pull the power plug out of the socket before
changing the interior light of the refrigerator.
WARNING
- Otherwise, there is a risk of electric shock.
Selecting the best location for the
refrigerator
• A location without direct exposure to sunlight.
• A location with flat floor surface.
• A location with enough space for the refrigerator
door to open easily.
• Allow sufficient space to the right, left, back and
top for air circulation. If the refrigerator does not
have enough space, the internal cooling system
may not work properly.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
100mm
100mm
50mm
50mm
DA99-02116P-11.indb 13
DA99-02116P-11.indb 13
• Allow clearance to the right, left, back and top
when installing.
This will help reduce power consumption and
keep your energy bills lower.
• Do not install the refrigerator in a place with the
temperature lower than 10 °C.
CAUTION
2000mm (RL55*/RL57*)
2000mm (RL55*/RL57*)
or or
1920mm (RL52*)
1920mm (RL52*)
600mm
at least
at least
50mm
50mm
960mm
• Height of the product may be different
depending on the models.
Pull the unit straight out when installing,
servicing or cleaning behind the refrigerator
and push it straight back after work is
complete. Make sure your fl oor can support
fully loaded refrigerator.
Remove paper on spacer and then attach
two spacers (Gray block) on the back side of
refrigerator for better performance.
Make sure two spacers fi x like below image
when you install the refrigerator.
It is improving the refrigerator performance.
Spacer
560mm
1,165mm
Spacer
setting up _13
2016. 3. 24.
2016. 3. 24.
10:50
10:50

Advertisement

Table of Contents
loading

Table of Contents