D-Link DIR-816L User Manual page 47

DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
Control
Wireless
Wireless (Client Mode)
Wi-Fi Filter
In this section, you can contact the technical support group (to send an e-mail). To do this, left-click
the support e-mail address in the bottom right corner of the page. After clicking the line, the e-mail
client window for sending a new letter to the specified address opens.
The Wireless element displays information on Wi-Fi module
operation in the 2.4GHz
Wi-Fi module settings in the 5GHz
(Band).
To the left, the name of the access point is displayed. You can
change it in the editing mode.
Use the Hide Access Point switch ( / ) to forbid or allow
users to see your wireless network.
Use the Enable/Disable Wireless switch (
disable your wireless network.
To the right, the standards of devices which can connect to the
access point are displayed. You can select other standards from the
drop-down list.
Use the Enable/Disable password protection switch ( / )
to modify security settings of your wireless network. If you want to
view or change the password, switch to the editing mode of the
relevant field.
The Wireless (Client Mode) element displays operation of Wi-Fi
module in the client mode. To the right of the graphical
representation of another access point, its name and MAC address
are displayed.
Use the Disable client mode switch (
mode.
The Wi-Fi Filter element displays the number of MAC addresses
specified in the MAC filter. The element is unavailable when the
Wi-Fi module is in the client mode. Place the mouse pointer over
the icon to view the list of MAC addresses, remove existing
addresses, or add new ones.
Use the Enable/Disable Wi-Fi filter switch (
disable the Wi-Fi filter.
Use the drop-down list to the right of the element to quickly change
the mode of the filter (allow or forbid access to your wireless
network).
Page 47 of 304
Configuring Device (Router Mode)
Description
band. To switch to the
band, click the icon
) to disable the client
editing mode of
other
) to enable or
) to enable or