D-Link DIR-816L User Manual page 275

DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
For the Open authentication type with encryption and the Shared authentication type, select a
needed value from the Default Key ID drop-down list. If needed, select the Encryption Key
WEP as HEX checkbox to set a hexadecimal number as a key for encryption. Then select a needed
value in the WEP key length drop-down list, fill in 4 Encryption Key WEP fields, and click the
Apply button.
For the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication types, fill in
the Encryption Key PSK field and click the Apply button.
If the router is connected to the selected network successfully, the green indicator appears to the
right of the network's SSID in the table.
Proceed to the Wi-Fi / Basic Settings page of the relevant band and make sure that the wireless
channel of DIR-816L has switched to the channel of the wireless access point to which you have
connected.
The step-by-step description of how to configure the router as a wireless client is available on
D-Link website. To access it, click the Configuring router in wireless client mode link in the
top part of the page.
Page 275 of 304
Configuring Device (Access Point Mode)