D-Link DIR-816L User Manual page 241

DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
If you want to use the router's wireless network in the 2.4GHz or 5GHz band to connect devices,
leave the corresponding checkbox (Enable broadcasting network 2,4GHz or Enable
broadcasting network 5GHz) selected. Then, if needed, specify another name for the network
in the SSID field (the name of the 5GHz band WLAN will contain the extra _5GHz identifier). Use
digits and Latin characters.
It is strongly recommended to configure the secure wireless network of DIR-816L. To do this, select
the Protected value from the Network Authentication drop-down list and enter a key (a
password that will be used to access your wireless network) in the Network key field. Use digits
and Latin characters. After applying this setting, the WPA-PSK/WPA2-PSK mixed
authentication type is specified for the router's WLAN. Click the Next button.
On the next page, the parameters of the network to which you want to connect, the entered
password, and the settings of the wireless network of the router are displayed. Make sure that the
specified settings are correct and then click the Apply button. After that, the wireless channel of
DIR-816L will switch to the channel of the wireless access point to which you have connected.
After clicking the Apply button, the Home / Information page opens.
Page 241 of 304
Configuring Device (Access Point Mode)