D-Link DIR-816L User Manual page 265

DIR-816L Wireless AC750 Dual Band Router & Access Point
with 3G/CDMA/LTE Support and USB Port
User Manual
To activate the WPS function, select the WPS Enable checkbox on the Wi-Fi / WPS/ 2.4 GHz or
Wi-Fi / WPS / 5 GHz page and click the Apply button. When the checkbox is selected, the
Information and Connection sections are available on the page.
Parameter
Default PIN code
WPS Status
SSID
Network Authentication
Encryption
Encryption key
Refresh
Reset to unconfigured
WPS Method
PIN Code
Connect
The PIN code of the router. This parameter is used when connecting
the router to a registrar to set the parameters of the WPS function.
The state of the WPS function:
Configured (all needed settings are specified; these settings
•
will be used upon establishing the wireless connection)
Unconfigured (after activating the WPS function, the SSID
•
and the encryption key will be configured automatically, the
network authentication type will be changed to WPA2-PSK).
The name of the router's WLAN (or the first part of the WLAN if the
network is splitted into parts).
The network authentication type specified for the WLAN (or first
part of the WLAN).
The encryption type specified for the WLAN (or first part of the
WLAN).
The encryption key specified for the WLAN (or first part of the
WLAN).
Click the button to refresh the data on the page.
Click the button to reset the parameters of the WPS function.
A method of the WPS function. Select a value from the drop-down
list.
PIN: Connecting the device via the PIN code.
PBC: Connecting the device via the push button (actual or virtual).
The PIN code of the WPS-enabled device that needs to be connected
to the wireless network of the router.
The field is displayed only when the PIN value is selected from the
WPS Method drop-down list.
Click the button to connect the wireless device to the router's WLAN
via the WPS function.
Page 265 of 304
Configuring Device (Access Point Mode)
Description