Erase All - Olympus Sigital Vision D-620L Instructions Manual

LCD Monitor
Écran ACL
Monitor LCD
M E N U
S H Q / H Q / S Q
+ / –
A E
E R A S E A L L
F O R M A T C A R D
W B
B A T T E R Y S A V I N G
D A T E
B R I G H T N E S S
E N D
136
: E R A S E A L L
O K
C A N C E L
E R A S I N G
E
OK button
1
When ERASE ALL is selected from the menu, the screen
Touche de
on the left appears on the LCD monitor.
confirmation
(OK) 2
Move the arrow to OK with the +/– buttons. Press the OK
Botón OK
button to start erasing. "ERASING" appears on the screen.
No other operation can be performed while erasing.
If there are no pictures recorded in the card, "NO
PICTURE" appears on the screen.
When complete, "NO PICTURE" appears on the screen in
the PLAY mode. In the RECORD mode, the Menu mode is
canceled.
Caution:
Never open the Card compartment cover, eject
the card, remove the batteries or disconnect the
AC adapter while erasing pictures. It may destroy
the data in the card.
Note:
When the write-protect adhesive seal is placed
on the card, "WRITE-PROTECT" appears on the
screen, and ERASE ALL is not engaged. (p. 70)
When there are pictures protected from a camera
or personal computer, only the unprotected
pictures are erased.
The erasing time varies depending on the
amount of images in the card.

ERASE ALL