Random Print - Olympus Digital Vision D-220L Instructions Manual

Press for 3 seconds — All print
Press for 5 seconds — All cancel
Touche maintenue enfoncée durant 3 secondes :
impression de toutes les données.
Touche maintenue enfoncée durant 5 secondes :
effacement de toutes les données.
Presione durante 3 segundos — Impresión completa
Presione durante 5 segundos — Cancelación de la
impresión
130
3
OK
3
SET
OK
E

RANDOM PRINT

You can select a series of pictures to be direct-printed.
1
Connect to the printer, turn on the power, then press the
Function button in the Display mode to select the Random
Print mode.
2
Select frames with the Previous (–)/Next (+) button and
press the OK button at each picture to be printed.
When the OK button is pressed for three seconds, the
camera produces a beep sound and enters the All-
Frame print mode. When the button is held down for
another two seconds, the camera produces the beep
sound again and erases the selection data.
3
Enter the number of copies to be printed on the printer,
then press the DIRECT PRINT button to start printing.
See page 128 for connection to the printer.
Note:
This mode is available only when the camera is
connected to the P-300U exclusive printer.
The data for the Random Print are stored in the
card even after printing.
Canceling the Print mode or turning off the
power erases the data.
The use of the optional AC adapter is
recommended.