Hw Setup - Toshiba NB500 User Manual

> SECURE -> Supervisor password.
This utility lets you do the following:
■
■
Starting the computer by password
To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 1,
At this point, the hotkeys FN + F1 to F12 do not work. They will function
after you enter the password.
2. Enter the Password.
3. Press ENTER.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

HW Setup

This section explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.
Accessing HW Setup
To run the HW Setup program, click Start -> All Programs -> TOSHIBA ->
Utilities -> HWSetup.
HW Setup window
The HW Setup window contains a number of tabs (General, Password,
Display, Boot Priority, Keyboard, LAN, SATA and USB) to allow specific
functions of the computer to be configured.
In addition there are also three buttons : OK, Cancel and Apply.
OK
Cancel
Apply
Downloaded from LpManual.com Manuals
User's Manual
Register or delete the supervisor password.
Specify restrictions for general users.
following message will appear in the screen:
Enter Password [ ]
NB500/NB505/NB520/NB525/NB550D/NB555D Series
Accepts your changes and closes the HW Setup
window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the HW
Setup window.
Getting Started. The
4-10