Samsung rl55VTEBG User Manual page 15

REVERSING THE
REFRIGERATOR DOOR
(CONT'D)
6. Separate the Front leg cover after removing 2
screws.
Screw
7. Unscrew 2 bolts tightening the Bottom hinge
and also unscrew a bolt on the left side by the
front leg where removed Bottom hinge will be
attached.
10mm
Before removing the Bottom hinge, slightly
turn the front legs clockwise for easier
disassembling and assembling.
8. Switch the position of the Bottom hinge shaft.
Remove the screw on the Auto guide and remove
the Bottom hinge shaft with 11mm wrench.
Attach the Bottom hinge shaft on the left and put
the reversed Auto Guide back.
Screw
9. Attach the Bottom hinge on the bottom left side
of the refrigerator where a bolt was previously
removed in step 8.
Screw remaining bolt on the bottom right side of
the refrigerator for the future usage.
DA99-02116K-10.indb 15 DA99-02116K-10.indb 15
Front leg cover
10mm
Auto guide
Bottom hinge shaft
10. Switch the side of bottom hinge cap and then
attach the Front leg cover on the bottom of the
refrigerator.
Bottom hinge
cap
11. Switch the side of the Middle hinge cap,
Screw cap and a Screw from left to the right side.
Middle hinge cap
12. Remove the screw on the bottom right side of
the Freezer door.
Switch the Door stopper and the Hinge grommet
from the right to the left.
Door stopper
Hinge grommet
13. Switch the Hinge grommet and the Grommet cap on
the top of the Freezer door.
Hinge grommet
Screw Screw
Screw cap
Grommet cap
setting up _15
2015. 6. 17. 2015. 6. 17. 2:48 2:48