Sharp MD-MS702MK Service Manual page 12

MD-MS702MK
Continued from
the preceding page
SKIP UP SKIP DOWN
C T 7
SKIP UP SKIP DOWN
S P M
M S L
R S L
* When the "STOP" button is pressed in specific menu, the TEST MODE STOP state is set.
* In specific state pressing the [DISP] key causes change to "focus setting menu".
* In the specific setting display state the setting change digit changes
when the [P-MODE] key is pressed.
1st digit (initial value)
* In the specific state the setting changes in the range of "0h to Fh"
when the [VOL UP/DOWN" key is pressed.
* To monitor the EFM output (eye pattern) at TP139, change "MSL"
from 00 to 80. The value of "MSL" is set to 00 when shipped.
: Control setting 2
: setting
: Special mode selection data (unprotect area)
: setting
: Monitor selection data (unprotect area)
: setting
: Control-related other setting data (unprotect area)
: setting
2nd digit
P-MODE
P-MODE
– 12 –