Xerox WorkCentre 5016 User Manual page 97

Xerox WorkCentre 5016/5020 User Guide
Downloaded From ManualsPrinter.com Manuals
N Codes
Error Code
n1 Memory is full.
n4 A data transmission error occurred
during a print job or a scan job.
The file that you sent to be printed
has an error.
The machine does not accept the file
that has been sent to the machine to
be printed.
n5 A communication error occurred
between the machine and the
scanner application. Alternatively,
after starting the scan application, no
scan job has been sent from the
computer.
n9 An internal communication error
occurred in the machine.
U Codes
Error Code
U0, U1, U2, An internal error occurred in the
U3, U4, U6, machine.
U7, U8, U9
Description
Description
Fault Clearance Procedure
Remedy
Press the <Stop> button to cancel the
job. Reload the unscanned
documents, and press the <Start>
button to resume scanning the rest of
the documents.
Press the <Stop> button to cancel the
job.
Press the <Stop> button to cancel the
job, and check the file to be printed.
Press the <Stop> button to cancel the
job.
The machine automatically resolves
this error after a certain amount of
time.
Switch the machine off and on. If the
error persists, contact the Xerox
Welcome Center.
Remedy
Switch the machine off and on. If the
error persists, contact the Xerox
Welcome Center.
97