Mobile Phone Operation With Bluetooth - Cobra MARINE HH500 Owner's Manual

Mobile Phone Operation
With Bluetooth
Operating Your Radio VHF Marine Radio Protocols

Mobile Phone Operation with Bluetooth

NOTE
Please refer to the Bluetooth Mode Pairing and Programming section on page
22 for instructions on how to pair your mobile phone with this device, change
ring tones, etc. The following section covers how to complete a phone call and
other basic operations.
Answer Incoming Phone Calls
Answering a Call
This handheld radio, once properly paired and connected to
GMRS
VHF
your Bluetooth
R
X
T calls received on your mobile phone. It can act as the speaker and
A microphone, while your mobile phone stays safe and dry. It will
B
U C I
also improve audio quality on both ends of the conversation.
ATIS VOX LOMEDHI SAME SAME MEM MEM
To Answer and End an Incoming Call:
1. The speaker will ring. The matrix will display
ANSWER.
Bluetooth Button M
2. Press and release the Bluetooth button on the front
panel. After the call is answered, the matrix will
display IN CALL.
3. Begin conversation with the caller by a pressing the
PTT (Push to Talk) key and speaking into the small
C
microphone above the LCD. This is very similar to a
EN
standard radio operation and it completely
eliminates all background noise when you are not
Connecting a Voice Dial Call
speaking.
GMRS
VHF
R
X
NOTE
T
To enable hands-free conversation or "VOX" mode
A
B
(pressing in the PTT key not required), use the
U C I
ATIS VOX LOMEDHI SAME MEM MEM
Channel Up and Channel Down keys anytime when
in Bluetooth mode. The "VOX" icon will turn on when
VOX mode is enabled.
The Bluetooth "VOX" setting does NOT reset to Off
after a power cycle unlike the normal VOX associated
with VHF mode.
4. To end a call, press and release the Bluetooth button.
The radio will then return to previous Standby mode
and resume normal operation.
40 English
®
®
® compatible mobile phone, can answer incoming
Mobile Phone Operation
With Bluetooth
Operating Your Radio VHF Marine Radio Protocols
Initiate a Phone Call
Initiating a Call
GMRS
There are several ways to initiate a call. These include
VHF
R
initiating (as normal) from the mobile phone, using voice
X
T
dialing and last number redial.
A
To Initiate from the Mobile Phone
B
U C I
ATIS VOX LOMEDHI SAME SAME MEM MEM
1. Simply dial a number on your mobile phone.
(See manufacturer's instructions for making a call.)
When the phone's Send key is pressed, the radio will
respond by changing over to Bluetooth mode and the
Connecting a Voice Dial Call
GMRS
matrix will display DIALING.
VHF
R
2. The matrix will display IN CALL when the receiving
X
T
party, or their voice mail, answers.
A
3. To end a call, press and release the Bluetooth button.
B
U C I
ATIS VOX LOMEDHI SAME MEM MEM
The radio will then return to previous Standby mode
and resume normal operation.
®
Nothing Comes Close to a Cobra ® 41