Cobra MARINE HH500 Owner's Manual page 14

Setup Mode Programming
Operating Your Radio VHF Marine Radio Protocols
Call Tone Select
Call Tone Select
This setting will also allow you to transmit a unique
GMRS
VHF
Call Tone alert to identify your radio when you transmit
R
X
T
messages. You can select from one of 10 different
A
Call Tone signals.
B
U C I
To Set Call Tone:
ATIS VOX LOMEDHI SAME MEM
1. From the previous press of the Call/Enter/Setup
button, the matrix will display CALL TONE SELECT
and the display will flash the current Call Tone
number (01 through 10).
2. Press the Channel Up/Down button to select a
different Call Tone. An example of each call tone will
sound for 1.5 seconds.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
NOTE
Call Tones are not usually used for Marine VHF
communications. We allow you to turn it On for your
unique communication needs. It is only compatible
with other Cobra VHF radios.
Roger Beep Mode
Roger Beep Mode
In Roger Beep mode, your listener will hear an audible tone
GMRS
when you release the Talk button. This alerts your listener
VHF
R
that you are finished talking and it is OK for them to speak.
X
T
To Set Roger Beep On or Off:
A
B
U C I
1. Display will show ROG icon flashing and the matrix
ATIS VOX LOMEDHI SAME MEM
will display ROGER BEEP ON or OFF.
2. Press Channel Up/Down button to select ON or OFF.
ROG will be displayed when On.
3. Press Call/Enter/Setup button to save this entry and
move to the next Setup mode programming.
Key Tone Mode
Key Tone Mode
In Key Tone mode, an audible tone will sound each time a
GMRS
VHF button is pressed or you change a setting.
R
X
T
To Set Key Tone On or Off:
A
1. Display will show Key Tone icon flashing and matrix
B
U C I
will display KEY TONE ON or OFF.
ATIS VOX LOMEDHI SAME MEM
2. Press Channel Up/Down button to select ON or OFF.
3. Press Call/Enter/Setup button to save entry.
20 English
Setup Mode Programming
Operating Your Radio VHF Marine Radio Protocols
Rewind Enable/Disable
MARINE H
Channel Up/Down Button
If Rewind is enabled, the last 20 seconds of incoming
audio is recorded and you can play back missed VHF calls
by pressing the Rewind button.
1. Display will show the Rewind icon flashing and the
matrix will display REWIND ENABLE or DISABLE.
CALL
2. Press Channel Up/Down button to select ENABLE
ENT SETUP
or DISABLE.
3. Press Call/Enter/Setup button to save entry.
Rewind Enable
GMRS
VHF
R
X
T
A
B
U C I
ATIS VOX LOMEDHI SAME MEM
Nothing Comes Close to a Cobra ® 21