Canon PIXMA MP470 series Quick Start Manual page 96

Macintosh® Software Installation
o
Connect one end of the USB cable to the computer and the
other to the machine.
WNote
Make sure the machine is turned on.
The system is restarted automatically.
When using Mac OS X v.10.2.S to v.10.3.3:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable
then plug it back in again, or turn the machine off then back on again.
WNote
• When using Mac
as x
v.10.2.8 to v.10.3.x, before using the Operation Panel on
the machine to save originals scanned to the computer, it is necessary to select
MP Navigator EX 1.0 or MP Navigator EX 1 as the launch application on Image
Capture under Applications. For details, refer to "Scanning Images" in the User's
Guide on-screen manual.
• If straight lines are misaligned or print quality is not satisfactory after installing the
MP Drivers, you may need to align the Print Head. Refer to "Aligning the Print Head"
in the Quick Start Guide.
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1-
®
on the front page.
Software installation is now complete.
(Ii)
When the User Registration screen appears, click Next.
WNote
To register later, click Cancel and go to Step
m.
After software installation is
complete, double-click .. on the desktop.
o
When the Setup Complete screen appears, click Next.
ID
When the Installation completed successfully screen
appears, click Restart.
I
WNote
• Since Mac@
as
9, Mac
as
x
Classic environments, or Mac
as
x
v.1 0.2.7 or earlier
are not supported, do not connect the machine to these.
• The screens below refer to Mac
as x
v.1 O.4.x installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator.
• Before installing the software, disable all anti-virus programs and automatically
loading programs.
f} Turn on your Mac and insert the Setup CD-ROM.
WNote
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
€)
Double-click the Setup icon.
o
When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password, click
? ,
then follow the on-screen instructions.
o
When the main menu appears, click Easy Install.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
WNote
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed with the installation.
() When the list of software to install appears, confirm the
contents, then click Install.
WNote
Move the cursor over items to display explanations of each application.
€)
Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
o
When the Print Head Alignment Recommended screen
appears, click Next.
lindows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.
072007AB
PRINTED IN VIETNAM