Canon PIXMA MP470 series Quick Start Manual page 93

1
Prepare the Machine
~~~
(1) Press the
.&
or ~ button (2) Press the OK button.
to select the language.
English
Deutsch
francais
Italiano
espanol
Nederlands
~=Set
f!fi;j,~G,g:'4i;ili;
~
Important
If an unintended language is displayed on the LCD, press the Back button to return
to the Language selection screen.
Once the message "Set the ink cartridge." appears, go to
0.
~
Important
• Make sure that the Document Cover is closed .
• Do NOT connect the USB cable at this stage.
€)
Open the Operation Panel, then press the ON/OFF button to turn
on the machine. The machine will initialize. Wait until the Power
lamp stops flashing and remains lit green.
o
Lift the Scanning Unit (Printer Cover), and pull the Scanning
Unit Support down into place. The FINE Cartridge Holder
automatically moves to the left.
®
Write down the serial number located inside of the machine. You
will need this to register your product.
o
Use the'" or .. button on the Operation Panel to select the
language for the LCD, then press the OK button.
o
Plug the power cord in the back of the machine and connect the
other end to the wall outlet.
A
Caution
Before turning on the machine, remove all of the shipping tapes.
o
Lift the Scanning Unit (Printer Cover) slightly to set the Scanning
Unit Support back to its original position, and then gently close
the Scanning Unit (Printer Cover).
{) Place the machine on a flat and horizontal surface, and do not
place any objects in front of the machine.
Remove all the shipping tapes and protective material on the outside of the
machine. Then open the Paper Output Tray.
o
Lift the Scanning Unit (Printer Cover), and pull the Scanning Unit
Support down into place.
o
Remove the protective material on the right side.
o
Unpack the Machine.
Confirm the included items against the illustration printed on the lid of the
packing box.
A USB cable is necessary to connect the machine with your computer.
~
Important
When moving the machine, carry the machine at both ends as shown below. Do
not lift the machine by grasping the Paper Support Extension.