Canon PIXMA MP470 series Quick Start Manual page 94

~
Important
When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to "Cleaning Your Machine" in the Quick Start Guide.
2
Install the FINE Cartridges
o
Remove the Black FINE Cartridge from its box.
o
Remove the protective tape gently.
Print Head Nozzles
~
Important
o
Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.
The machine may not print out properly if you touch it.
o
Do not drop or shake FINE Cartridges as this may cause the ink to leak out and
stain your clothes and hands.
o
Do not reattach the protective tape once you have removed it.
o
Be careful not to stain your hands or surrounding work area with ink on the
removed protective tape.
{) Insert the Black FINE Cartridge slightly slanted into the left
slot@.
Make sure that the procedure for installing the FINE Cartridges is displayed on
the LCD and the FINE Cartridge Holder has moved to the left.
o
Push up the FINE Cartridge until it clicks into place.
~
Important
For correct machine operation, make sure the FINE Cartridge is securely inserted.
o
Repeat the procedure for the Color FINE Cartridge, inserting it
into the right slot
©.
(1)
Lift the Scanning Unit (Printer Cover) slightly to set the Scanning
Unit Support back to its original position, and then gently close
the Scanning Unit (Printer Cover).
~Important
Once you have installed the FINE Cartridges, the message "Processing ... Please
wait momentarily." is displayed on the LCD. Wait until the copy standby screen is
displayed before proceeding. It takes about one minute.
a·1
I§l » ~
Copies
0' ..
EJ EJ ()
100%
<=!!J~>
8.5"x11 "(215x278) •
Plain paper
Standard
o
=Start copy
Hardware setup is now complete.
Next, turn over and install the software.