4-2. Driving Procedures; Power (Ignition) Switch - Lexus LS 600h L 2015 Owner's Manual

216

4-2. Driving procedures

Power (ignition) switch

Performing the following operations when carrying the electronic key
on your person starts the hybrid system or changes power switch
modes.
Starting the hybrid system
Turn the power switch to ON mode (P. 217) and check that the park-
1
ing brake is set.
Check that the shift lever is set in P.
2
Firmly depress the brake pedal.
3
The power switch indicator will turn green. If the indicator does not turn green,
the hybrid system cannot be started.
Press the power switch.
4
After a while, the "READY" indicator
comes on with a beep sound.
The vehicle can move when the
"READY" indicator is on even if the
engine is stopped.
Continue depressing the brake pedal
until the hybrid system is completely
started.
The hybrid system can be started from
any power switch mode.
Check that the "READY" indicator is on.
5
The vehicle will not move when the "READY" indicator is off.
LS600hL_U(OM50E41U)