Lexus LS 600h L 2015 Owner's Manual page 315

The Blind Spot Monitor function is operational when
■
The BSM main switch is set to on
●
Vehicle speed is greater than approximately 10 mph (16 km/h).
●
The Blind Spot Monitor function will detect a vehicle when
■
A vehicle in an adjacent lane overtakes your vehicle.
●
Another vehicle enters the detection area when it changes lanes.
●
Conditions under which the Blind Spot Monitor function will not detect a vehicle
■
The Blind Spot Monitor function is not designed to detect the following types of vehi-
cles and/or objects:
Small motorcycles, bicycles, pedestrians etc.
●
Vehicles traveling in the opposite direction
●
Guardrails, walls, signs, parked vehicles and similar stationary objects
●
Following vehicles that are in the same lane
●
Vehicles driving 2 lanes across from your vehicle
●
*
: Depending on conditions, detection of a vehicle and/or object may occur.
LS600hL_U(OM50E41U)
4-5. Using the driving support systems
*
*
*
313
*
4