Lexus LS 600h L 2015 Owner's Manual page 112

110
2. Instrument cluster
Press and hold the "DISP" button
5
after selecting the "EXIT" by
pressing the "DISP" button.
The display goes back to step
System check display
■
After turning the power switch to ON mode, "SYSTEM CHECK" is displayed while
system operation is checked.
Tire inflation pressure
■
It may take a few minutes to display the tire inflation pressure after the power switch
●
is turned to ON mode. It may also take a few minutes to display the tire inflation
pressure after inflation pressure has been adjusted.
"---" may be displayed if the tire position information cannot be determined due to
●
unfavorable radio wave conditions.
Tire inflation pressure changes with temperature. The displayed values may also be
●
different from the values measured using a tire pressure gauge.
When disconnecting and reconnecting 12-volt battery terminals
■
The following information data will be reset:
Driving range
●
Average fuel consumption
●
Average fuel consumption after refueling
●
Distance after refueling
●
Elapsed time
●
Average vehicle speed
●
Liquid crystal display
■
Small spots or light spots may appear on the display. This phenomenon is character-
istic of liquid crystal displays, and there is no problem continuing to use the display.
Customization
■
Setting of available languages can be changed. (Customizable features P. 565)
LS600hL_U(OM50E41U)
.
1