RIDGID r4510 Operator's Manual page 17

ASSEMblY
TO ClOSE THE lEG STAND AND MOVE THE
SAW
See Figures 13 - 16.
 Remove any workpieces from the tool.
 Remove and securely store any tools or accessories such
as rip fence, miter gauge, clamps, blade guard, etc.
 Lower the saw blade.
To close the leg stand:
 At the same time, step on the release lever, grasp the
grips, and lift the handles up and away from the body.
 Push the table saw until the release lever clicks and locks
into place.
To move the leg stand:
 Holding the grips firmly, pull the handles toward you until
the leg stand and saw are balanced on the wheels.
 Push the saw to the desired location then either open
the leg stand for saw operation or store the saw in a dry
environment.
ReleaSe
leVeR
Fig. 13
17
Fig. 14
Fig. 15
Fig. 16