Laser Safety - Xerox CopyCentre C20 User Manual

FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital
Reference CFR
47 Part 15
Section 15.21

Laser Safety

Page 1-10
Downloaded From ManualsPrinter.com Manuals
WARNING: Shielded cables must be used with this equipment to maintain compliance
with Council Directive 89/336/EEC.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the product is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Changes or modifications to this equipment not specifically approved by the XEROX
Corporation may void the user's authority to operate this equipment.
Shielded cables must be used with this equipment to maintain compliance with FCC
regulations.
WARNING: Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
With specific regard to lasers, the equipment complies with laser product performance
standards set by governmental, national and international agencies as a Class 1 Laser
Product. It does not emit hazardous radiation as the beam is totally enclosed during all phases
of customer operation and maintenance.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide