Garland GI-MO/DU 7000 Installation, Operation And Maintenance Manual page 34

Installation
1. To install the Mounting Frame:
i. Counter-top cut-out dimension, see dimensional
drawing of the mounting frame.
ii. Use the pre-drilled Ø8mm holes on the frame as the
locational guide, install studs / mounting bolts (size
M5) onto the underside of the counter-top.
iii. Fasten the frame securely.
2. To install the silicone gaskets:
i. Clean surfaces:
BEFORE applying any silicone adhesive, CLEAN glass,
silicone gaskets, frame, and tops with isopropyl
alcohol or equivalent.
ii. Apply a line of silicone adhesive PACTAN onto the
flange on the frame. Silicone adhesive PACTAN is not
provided (part number = 70000015).
iii. Place the silicone gaskets (provided) onto the flange.
iv. Then apply another line of silicone adhesive onto the
silicone gasket.
34
i
iii
ii
iv
iii
ii
Part Number 4532415 Rev 5 12/15
Section 2