Olympus FL 50R Instruction Manual page 15

Flash intensity control
Flash intensity value
(The light control range will
not be displayed while an
adjustment value is set.)
e.g.)
Selected
adjustment
Flash
Camera
x
Notes
In MANUAL and FP MANUAL mode settings on the camera will be
ignored.
2
Turn dial B to select a flash intensity
value.
Turning the dial toward + will change the
value as follows: 0 +0.3 +0.7 +1.0...
Turning the dial toward – will change the
value as follows: 0 -0.3 -0.7 -1.0...
3
When the camera's flash intensity
control mode is set, the actual flash light
intensity will be the total of the flash
intensity value set on the electronic
flash and that set on the camera.
The flash intensity value displayed on the
control panel is that of the electronic flash
only.
Adjustment value
value on the control panel
+0.3
+0.3
+3.0.
-3.0.
displayed
+0.3
Actual flash
intensity value
+0.6
15
EN