Table of Contents
Advertisement
Using 3D
(for 3D models only)
The LED indicator for the chargeable 3D active glasses
The LED indicator of the glasses changes depending on the
operating conditions.
If you put the glasses on, the power is
Turning the power on
automatically turned on and the LED is
lit green for 3 seconds.
If you take the glasses off, the power is
Turning the power off
automatically turned off and the LED is
lit red for 3 seconds.
When pairing is in
The LED alternates between green and
progress
red.
The LED blinks red at 2 second intervals.
When charging the
In this case, charge the glasses with the
battery is necessary
micro USB cable.
When the battery is
The LED blinks amber at 1 second
being charged
intervals.
When the battery is
The LED blinks green at 2 second
fully charged
intervals.
Charging the chargeable 3D glasses
If the LED blinks red at a 2 second interval, charge the glasses with
the micro USB cable.
When the battery is fully charged, the LED blinks green at a 2
second interval.
USB cable
Micro USB cable
Chapter 2.
67
Using the computer
PC
USB
Notebook
Advertisement
Table of Contents
