Table of Contents
Advertisement
Connecting an External Display Device
Connecting to the monitor port
You can experience a wider screen by connecting the computer to
a monitor, TV or projector with a monitor port. You can give better
presentations by connecting the computer to a projector.
1
Connect the RGB port of the computer and the port of the
monitor or TV with the monitor cable (15 pin).
External
Monitor
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
TV
Projector
3
Press the
+
Fn
setting screen appears where you can select the monitor
mode.
Since pressing the
key changes the selection, select a display device.
•
If the screen is not switched even if you press the
+
key combination, you have to install the Easy
Settings program.
•
External Monitor / TV is not supported in the DOS
Command Prompt window.
Chapter 2.
Using the computer
key combination once. Then the
key while holding down the
49
Fn
Fn
Advertisement
Table of Contents
