Table of Contents
Advertisement
Connecting an External Display Device
Connecting through the HDMI/DP port (Optional)
By connecting the computer to a TV with a HDMI/DP port, you
can enjoy both a high visual quality and a high sound quality.
After connecting a TV through HDMI/DP, you have to confi gure
the screen and sound.
1
Connect the HDMI/DP cable to the HDMI/DP port of the TV.
External
Monitor
•
This is only supported for models that support a TV output
port (HDMI/DP).
•
When connecting the computer to a TV, switch the
external input mode of the TV to HDMI/DP.
TV
Projector
2
Press the
+
Fn
setting screen appears where you can select the monitor
mode.
Since pressing the
key changes the selection, select a display device.
•
If the screen is not switched even if you press the
key combination, you have to install the Easy
+
Settings program.
•
External Monitor / TV is not supported in the DOS
Command Prompt window.
Chapter 2.
Using the computer
key combination once. Then the
key while holding down the
51
Fn
Fn
Advertisement
Table of Contents
