Table of Contents
Advertisement
Using 3D
(for 3D models only)
2
If you put on the 3D active glasses and press the 3D button, the
data exchange begins between the glasses and the software
(hereafter, referred to as pairing).
•
Only when a 3D video or 3D game is executed can the
pairing process be done.
•
More than one person can watch pictures in 3D at the
same time using more than one pair of glasses.
•
A chargeable pair of 3D active glasses may not work if
the battery is discharged. In this case, charge the glasses
before use.
•
For chargeable 3D active glasses, if the glasses do not start
working immediately when you put them on in 3D mode,
lightly touch the 'sensor pad' of the glasses or press and
hold the 3D button for 3~5 seconds to reattempt pairing.
•
For battery-operated 3D active glasses, you have to press
and hold the 3D button for 4~5 seconds or longer when
you perform pairing for the fi rst time.
3
Now, you can enjoy videos or games in 3D.
The LED indicator for the battery-operated 3D active
glasses
If you press the power button, the LED
On
turns yellow for 3 seconds and then
turns off .
If you press the power button, the LED
Off
turns red for 3 seconds and then turns
off .
When the pairing
The LED blinks yellow.
process is in progress
When the pairing
The LED alternates between blinking
progress has been
yellow and red for 3 seconds each.
completed
When the battery
The LED blinks red continuously.
needs to be replaced
Chapter 2.
66
Using the computer
Advertisement
Table of Contents
