Table of Contents
Advertisement
Adjusting the CCD and the image
processing function [PIXEL MAPPING]
s (Settings 2)
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and the image
processing function
Press the A button when [START]
(Submenu 2) is displayed.
●
The camera checks and adjusts the CCD and the
image processing function at the same time.
Adjusting the brightness of the monitor
[s]
s (Settings 2)
To adjust the monitor brightness
1 Use FG to adjust the brightness while
viewing the screen, and then press the
A button.
44 EN
PIXEL MAPPING
s
s
BACK
MENU
SET
Setting the date and time [X]
t (Settings 3)
"Setting the date, time and time zone"
(p. 13)
To select the date display order
1 Press I after setting Minute, and use
FG to select the date display order.
Date order
OK
X
X
Y
M D
TIME
.
.
:
2010
02 26 12 30
Y / M / D
Y / M / D
CANCEL
MENU
SET
OK
Hide quick links:
Advertisement
Table of Contents
